Updating Results

South Metropolitan TAFE Courses

Advanced Training for Oil and Chemical Tanker Cargo Operations

Non-Award

This advanced training course is for Masters, Chief Engineers and Chief Mates and provides candidates with the skills and knowledge to meet the relevant AMSA requirements for: STCW Reg V/1-1 and Code Section A-V/1-1, paragraph 3, Table A-V/1-1-3 STCW Reg V/1-1 and Code Section A-V/1-1, paragraph 2...

Certificate I in Leadership

Certificate

Murdoch

Ready to take the lead?. This qualification provides a good stepping stone for going into work and becoming actively involved in the community. It also provides you with employability skills applicable to a range of industries and careers.

Duration

1 semester full-time

Certificate II in Drainage

Certificate

Set down the ground work for your career The Certificate II in Drainage is suitable for people working in the plumbing industry that specialise in 'ground works'.

Entry Requirements

School Leaver	Non-School Leaver	AQF
OLNA or NAPLAN 9 Band 8	C Grades in Year 10 English and Maths or equivalent	Certificate I or Certificate II

This course is available as a traineeship.

Entrance requirements for traineeships

You must be employed in a training contract by an appropriate organisation to study an apprenticeship or traineeship.

In a traineeship you also gain hands-on skills and work experience, and improve your employment prospects, while earning a wage. On successful completion you will gain a nationally recognised qualification which can lead to rewarding career options. The difference between a traineeship and an apprenticeship is that a traineeship can be either a full time or part time employment based training arrangement, usually for a nominal duration of 12 months or more, generally in a non-trade related area.

To find out how to arrange a traineeship and study at South Metropolitan TAFE, please contact the Jobs and Skills Centre closest to you.

Study Mode

In person

Diploma of Building and Construction (Building)

Diploma

Thornlie

Do you want to build a career from the foundations up to the ridge flashing?. When you complete the Diploma of Building and Construction (Building) you will be ready for a career as a construction site manager, or (with additional experience) registered building practitioner.

Entry Requirements

Prospective applicants should already have a minimum of 3 years experience in a supervisory role within the building and construction industry.

In order to complete this course you will need to be able to:

a
pply knowledge of structural principles
apply knowledge of risk and financial management
accurately estimate costs including labour, materials and overheads
prepare and administer building and construction contract
select contractors and supervise work

It is also expected that you will have a high level of

digital literacy including the ability to use estimating software, access library databases, online research skills and the ability to independently learn through an online platform. You must also have access to a live building and construction workplace to be able to meet the requirements for some units.

Students without the minimum education requirements may also be considered, provided they have relevant work experience and a demonstrated capacity to meet the course requirements.

Duration

4 semesters full-time

Study Mode

Online, In person

CNC Operations Skill Set

Non-Award

Rockingham

Learn how to operate CNC machinery The CNC Operations skill set is for qualified/experienced tradespersons employed in an engineering production or manufacturing environment.

Entry Requirements

You must be a qualified tradesperson in engineering or manufacturing, looking to upskill into defence manufacturing.

Completion of the following units is a prerequisite for this skill set.

For the unit MEM07028B Operate Computer Controlled Machines/Processes
Prerequisite: MEM07024B Operate and monitor machine/process
For the unit MEM07015B Set Computer Controlled Machines/Processes
Prerequisite: must meet all of either Path 1 or Path 2 as follows.

Path 1
MEM07024B Operate and monitor machine/process
MEM07028B Operate computer controlled machine/processes
MEM09002B Interpret technical drawing
MEM12023A Perform engineering measurements
MEM18001C Use hand tools

Path 2
MEM07005C Perform general machining
MEM09002B Interpret technical drawing
MEM12023A Perform engineering measurements
MEM18001C Use hand tools

For the unit MEM07016C Set and Edit Computer Controlled Machines/Process
Prerequisite units: must meet all of either Path 1 or Path 2 as follows

Path 1
MEM07015B Set computer controlled machines/processes
MEM07024B Operate and monitor machine/process
MEM07028B Operate computer controlled machines/processes
MEM09002B Interpret technical drawing
MEM12023A Perform engineering measurementsMEM18001C Use hand tools

Path 2
MEM07005C Perform general machining
MEM07015B Set computer controlled machines/processes
MEM09002B Interpret technical drawing
MEM12023A Perform engineering measurements
MEM18001C Use hand tools

If you do not hold the above units then you can look into recognition of prior learning (RPL). Contact South Metropolitan TAFE's Jobs and Skills Centres on 13 64 64 or email rpl@smtafe.wa.edu.au to discuss your RPL enquiry.

Study Mode

Online, In person

Certificate III in Work Health and Safety

Certificate

Thornlie

When you complete the Certificate III in Work Health and Safety you can expect to be a valued addition to any organisation as a work health and safety advisor. . This qualification reflects the role of individuals performing work health and safety (WHS) duties in addition to their main duties.

Entry Requirements

School Leaver	Non-School Leaver	AQF
OLNA or NAPLAN 9 Band 8	C Grades in Year 10 English and Maths or equivalent	Certificate I or Certificate II

Certificate IV in Spoken and Written English for Further Study

Certificate

Are you new to Australia?. When you finish the Certificate IV in Spoken and Written English for Further Study, your English skills will be suitable for studying a Diploma or entering Murdoch or Curtin University.

Certificate II in Automotive Body Repair Technology (Panel Beating Pre-apprenticeship)

Certificate

Are you revved up for a career in giving cars their shine?. When you complete the Certificate II in Automotive Body Repair Technology (Panel Beating Pre-Apprenticeship) you'll have what employers are looking for in an apprentice auto body repairer/panel beater.

Entry Requirements

School Leaver	Non-School Leaver	AQF
OLNA or NAPLAN 9 Band 8	C Grades in Year 10 English and Maths or equivalent	Certificate I or Certificate II

Diploma of Logistics

Diploma

Fremantle

Become a manager of supply chain management and gain specialist knowledge in logistics. .

Entry Requirements

School Leaver	Non-School Leaver	AQF
Completion of WACE General or ATAR (Minimum C Grades) or equivalent	Completion of WACE General or ATAR or equivalent (minimum C Grades)	Certificate III

t is recommended students be at least 18 years of age to commence this course.

Prospective students should hold one of the following:

Certificate IV in Supply Chain Operations
Certificate IV in Supply Chain Operations (Warehousing)
Certificate IV in Supply Chain Operations (Purchasing and Procurement)
Certificate IV in Supply Chain Operations (Logistics)
Equivalent industry experience

Duration

2 semesters full-time

Study Mode

Online, In person

Advanced Diploma of Process Plant Technology

Diploma

Have a career dream to work on key oil and gas projects and reach your true potential in a supervisory role? Become a highly skilled operator in process plant technology with this advanced qualification..

Entry Requirements

School Leaver	Non-School Leaver	AQF
Completion of WACE General or ATAR (Minimum C Grades) or equivalent	Completion of WACE General or ATAR or equivalent (minimum C Grades)	Certificate III

New students who have not studied PMA50116 Diploma of Process Plant Technology must apply instead for the lower level qualification due to pre-requisite skills/knowledge requirements. Students that have already completed PMA50116 Diploma of Process Plant Technology are eligible to apply for a credit transfer to reduce the study load and overall course cost.

Certificate IV in Aeroskills (Avionics)

Certificate

Jandakot

Are you looking for an in-demand career looking after the world's most advanced technology?. When you complete the Certificate IV in Aeroskills (Avionics) you will be looking at an exciting career working on aircraft large and small as an aviation maintenance engineer.

Entry Requirements

School Leaver	Non-School Leaver	AQF
C Grades in Year 11 WACE General English, and OLNA; or NAPLAN 9 Band 8	C Grades in Year 11 English and Maths or equivalent	Certificate II or Certificate III

This course is available as an apprenticeship.

Entrance requirements for apprenticeships

You must be employed in a training contract by an appropriate organisation to study an apprenticeship or traineeship.

An apprenticeship involves full time work with an employer who provides an opportunity to learn all aspects of a trade. This is a structured program for a fixed period of time and while you learn on the job, you also attend off the job training at SM TAFE.

Some of the benefits of an Apprenticeship are that you can:

earn a wage while you train
learn on the job skills combined with off the job training
receive a nationally recognised qualification on successful completion
start a valuable step towards a rewarding career path

Study Mode

In person

Certificate IV in Ageing Support

Certificate

Mandurah

Do you have a caring nature and want to build your career in an area that makes an important daily difference? .

Entry Requirements

School Leaver	Non-School Leaver	AQF
C Grades in Year 11 WACE General English, and OLNA; or NAPLAN 9 Band 8	C Grades in Year 11 English and Maths or equivalent	Certificate II or Certificate III

Completion of CHC33015 - Certificate III in Individual Support (Ageing or Ageing, home & community) is a requirement for this course.
Those who have the older version of the Certificate III in Aged Care and are working in industry, we encourage you to apply for Recognition of Prior Learning and taking units in this course one to two days a week while you work
Students under the age of 18 might not be able to meet the workplace assessment requirements of this qualification if a place cannot be found for work placement.

New students who have not studied the Certificate III in Individual Support (Ageing or Ageing, Home & Community) must apply instead for the lower level qualification due to pre-requisite skills/knowledge requirements. Students that have already completed Certificate III in Individual Support (Ageing or Ageing, Home & Community) are eligible to apply for a credit transfer to reduce the study load and overall course cost.